Your half right. It’s not really the OS’s fault but rather the fault of the browsers and app-frameworks that use the browser in the background (electron). Because neither Firefox nor chrome have this feature implemented for Linux. The official Discord client doesn’t do it either but other ones such as Sunroof do. It’s possible that at least one Matrix client has learnt to share the screen with sound on Linux but I don’t know of any (I also don’t use Matrix a lot so don’t pay too much attention to my experience on that)

Linux has had MPP (Microsoft Pen Protocol) support baked in for some time now. Dell sells such a pen which they call the Dell Active Pen but theoretically any MPP pen should work.

It’s not exactly what you are looking for, because the pen is not battery free, but the star lite is a surface style convertible that ships with Linux out of the box. And it supports MPP pens

https://starlabs.systems/pages/starlite#

Don’t get your hopes up just yet. This is just my idea of how such an app could look like. Doesn’t mean, anybody is actually going to build it.

Thank you

You might want to take a look at sxmo then: https://wiki.postmarketos.org/wiki/Sxmo

Sxmo utilises your phone’s volume buttons to navigate menus. Plus you get to bragg that you are running sway on your phone 😉

Of course. But I had to target a form factor for my graphics. I’m aware that a real app would likely scale correctly on both mobile and desktop.

In other words Airdrop for Linux that works with both iOS and Android.

May I introduce you to LocalSend

I’ve just tried building Thunder for desktop and it works fine so far without any tweaks nessesary. In fact I’m writing this comment using this very build.

If there’s interest I might be looking into turning this into a proper flatpak.

I haven’t tried it myself but the StarLite is a surface style convertible designed to run Linux, even shipping with the distribution of your choice right out of the box. And apparently it supports MPP pens. It’s not in the official specs but StarLabs is selling an active pen that’s “exclusively designed for the StarLite Mk V”

https://starlabs.systems/pages/starlite?shpxid=8d568063-b691-4a60-928b-f2a82c820093

It’s not just a YouTube downloader, it also allows you to download videos from, as the official website says, “a few more sites”. Those include social media sites such as twitch or twitter but also the online platforms of TV networks. If you live in the US, you can for example download full episodes from the big broadcasting networks (ABC, NBC, CBS) and PBS. If you’re British you can download stuff from the BBC. Germans find their public broadcasters supported as well. Likewise for a bunch of other European countries and Australia.

And with a good VPN you have access to all of the above.

You need to do the initial setup using the webui. You can access the UI with your synology’s IP address or domain name (if configured) followed by :8096 That’s also the URL, that you need to enter in finamp once you created an user in the webui

And Libreelec provides preconfigured images for the pi. You still need to jump through some hoops to get streaming services running (html5 encrypted media extensions and all that) but it streamlines the process of getting started with kodi a lot.

Another project to keep an eye on is plasma big screen. It’s not quite there yet, but it will eventually provide a more familiar smarttv experience. (Currently it’s missing a lot of apps, that kodi has)

No. On your screenshot you can see that the apps that you are trying to install are numbered. It’s hard to notice because you are only installing on app so the numbering stops at one, but if you tried to install multiple apps or the app depended on an other package from the AUR you would see more entries in this list and each entry would be numbered.

So specifying a range would mean package 1, 2 and 3. An option like that can come in handy when performing updates

lets start with why you are getting this output: If you see a screen like this your app is pulled from the AUR. The AUR works different from the other repos. While the normal repos download standardized arch packages in the form of tar-archives the AUR takes a more radical approach: get the app on your system by (almost) any means necessary. So the AUR doesn’t contain a package but a text file containing instructions. Where to download the necessary files, where to put them, that sort of stuff. In most cases the files is just the source code and your system will compile it according to the instructions in that text file. Compiling means it will turn the human readable programing in to computer readable stuff. In other words, it will create, or build, a standard arch package right then and there, on your system. That’s why the text file is referred to both as “Build Files” or as Pkgbuild.

If you look at your screenshot, you see, that it first downloads your PKGBUILD and then shows the file as present (it uses the plural, because in exceptions there are additional files such as systemd-files that are downloaded as well).

When installing apps from the AUR yay will cache stuff to speed up build times. Performing a clean build means not using this cache. In most cases just pressing enter will work just fine.

And now is the part were I must warn you: Be careful with the AUR:

1. Every app gets root during install, meaning that it can do everything it wants during that time. It’s generally recommended that you review every Pkgbuild before installing it. Nobody i know actually does that and the AUR is moderated, so there are people that take actions if someone uploads malware, but that’s mostly reactive. To my knowledge there never has been malware in the AUR but it is a possible attack vector.
2. The official wiki states: “The AUR is unsupported, so any packages you install are your responsibility to update, not pacman’s. If packages in the official repositories are updated, you will need to rebuild any AUR packages that depend on those libraries.” yay will mostly take care of that but there is also [3]
3. Most impotently: The AUR is a project of Arch Linux. You are not using Arch, you are using Manjaro. Manjaro is build on top of Arch, but the tend to hold updates back a bit while they check them for bugs. The people managing the AUR don’t care about that. So they might push an update assuming your system to have those held back updates and things may break.

In conclusion. If possible stick with the repos and flatpak. If an app is not available this way you can use the AUR. If you use the AUR you can keep just pressing Enter until the app in question is installed. Just don’t be surprised if the app breaks two months later because of something stupid the Manjaro devs did

You could certainly do worse for a nas than a thin client with hard drives. But you probably want to go for something where you can add you hard drives via SATA rather than usb. That being said I haven’t run into any issues with consumer grade usb-harddives (but I’m also cognicent of the fact, that I’m not using than the way there are intended).

As a OS for a thin client solution or a NAS build from scratch may I recommend OpenMediaVault? It’s basically just Debian but with a nice web UI on top to help you manage your system. You still have full command line access but the web UI helps you to configure your drives and create network shares.

If you install the community add-ons (OMV-Extras) you also gain the gain the possibility to install and manage docker containers graphically

The only thing to keep in mind is that omv requires a bigger harddrive than the NVME drive that comes with most thin client. So there is a good chance that you need to change that (which will set you back an additional 20 or so bucks)

I have my media on hard drives strapped to the thin client externally but you should also be able to use an external nas. But I’ve never done that, so I can’t comment on how well that works. I’ve never seen anyone complain about such a setup though.

Btw: what nas are you using? Some NASs allow the direct installation of docker containers (Synology for example). So you could possibly run Jellyfin directly off your existing hardware

I’m using a hp thin client, I got refurbished for 30 bucks of of eBay. Basically any thin client should be more than enough and they don’t draw much power. The question is how many streams are you looking to facilitate simultaneously and at what resolution. Even a raspberry pi should be enough if you are only looking to stream one video at 1080p but it will struggle at two (and if you don’t enable any hardware transcoding, you don’t stand any chance). If you need more than that, you’ll need something beefier

You can actually write posts from a Mastodon account that look well on Lemmy. All you have to do is follow a few basic rules.

1. Your post must include a line break. Everything above the break will be converted into the title of the post, everything below into the body.
2. Don’t put any hyperlinks into your title. That includes hashtags and @ mentions. See the original post for why
3. Keep your headline short. Lemmy has a character limit for the headline and if you exceed it your title might just end mid sentence
4. Put the @ mention of the community at the end of your post. It’s nothing but a technical necessity, so treat it as such and hide it away at the bottom of your post

If you follow these rules you can write posts from Mastodon

What do you mean, there are no clear guides for Linux? https://demo.papercut.com/content/help/clienttool/topics/user-client-install-linux.html

It’s even in the AUR: https://aur.archlinux.org/packages/papercut-client-bin

Inkscape is like Illustrator. Krita is a digital painting application, so Photoshop. It doesn’t replace Photoshop in every usecase. But in that regard it’s better than the tool from Adobe (or so I’ve been told)