nitrolife

Russian, English and some Japanese.

Short command wasn’t work in my env. I can run only with full sockets path. May be I do something wrong.

Thanks. Not full wayland protocol support and have a bugs, but something is greater than nothing. UPD: The utilization of the Internet channel has also increased

Eh, the era when it was possible to throw the interface through an SSH session is over. Sadly. Or maybe I’m just too old. XD

In first you need understand what type of suspend you use:

Suspend to RAM (aka suspend, aka sleep) The S3 sleeping state as defined by ACPI. Works by cutting off power to most parts of the machine aside from the RAM, which is required to restore the machine’s state. Because of the large power savings, it is advisable for laptops to automatically enter this mode when the computer is running on batteries and the lid is closed (or the user is inactive for some time). Suspend to disk (aka hibernate) The S4 sleeping state as defined by ACPI. Saves the machine’s state into swap space and completely powers off the machine. When the machine is powered on, the state is restored. Until then, there is zero power consumption. Hybrid suspend (aka hybrid sleep) A hybrid of suspending and hibernating, sometimes called suspend to both. Saves the machine’s state into swap space, but does not power off the machine. Instead, it invokes the default suspend. Therefore, if the battery is not depleted, the system can resume instantly. If the battery is depleted, the system can be resumed from disk, which is much slower than resuming from RAM, but the machine’s state has not been lost.

I think you use Hybrid suspend. Hybrid suspend store memory to disk (20 seconds lag) and then lost battery for memory renew. Need you Suspend to RAM maybe? 20 Seconds lag will fixed with that.

Then check

cat /sys/power/mem_sleep

If you see

[s2idle] shallow deep

check first if your UEFI advertises some settings for it, generally under Power or Sleep state or similar wording, with options named Windows 10, Windows and Linux or S3/Modern standby support for S0ix, and Legacy, Linux, Linux S3 or S3 enabled for S3 sleep.

If you don’t see anything you can swap sleep mode to Suspend to disk. That slow but don’t use any power. Or try fix sleep status.

More information you can find here: https://wiki.archlinux.org/title/Power_management/Suspend_and_hibernate

Raid: https://wiki.archlinux.org/title/RAID

Don’t forget part “email notifications”. In addition to configuring the raid, you need to understand when the disk crashed, otherwise the raid will not help.

If you share files with windows. Basic way SMB share: https://wiki.archlinux.org/title/Samba

if you want share files with linux or windows with not basic ways you have many choises. NFS for example, or sshfs if you need folder time to time, or share directory with nginx ( https://stackoverflow.com/questions/10663248/how-to-configure-nginx-to-enable-kinda-file-browser-mode ), or overkill: nextcloud server.

UPD: In general, you just need to find a linux distributive with good documentation and use this documentation for the first time. Some things are solved differently in Linux than in Windows and you just won’t know about it without reading the wiki.

I wrote a little bit about something else.

The law of conservation of energy always applies. If the wind rotates the windmill, then the energy of the wind force is converted into the energy of rotation of the windmill, and the wind energy reserve decreases.

I have not found a single study on the impact of the global installation of wind turbines on wind roses around the world. Accordingly, I just can’t understand why this energy is considered “green”. Then the gasoline generator is quite environmentally friendly until the number of generators reaches a critical level.

Moreover, the consequences of even a slight change in the wind rose are much more catastrophic than the pollution of the planet with carbon dioxide. For example, such as you see in the picture in the post.

They cost a few dollars per full recharge to charge compared to $30-50 per gas tank

In my region full car fuel by gasoline cost 20$ and full electrocar recharge cost 14$. Not so much economy.

they often regulate their internal temperature while charging so no waiting ages for the car to warm up first thing in the morning while you scrap ice off the windows

If I drop electric car as my usual car on a field on nowhere I can’t go anywhere in the morning. If I drop my electric car on parking that costs recharge more than gasoline for usial car.

Warming up the cabin also exists in my anti-theft system, just press the button while drinking tea before leaving.

and who doesn’t love the instant insane torque that an electric motor provides?

The moment to achieve which you need to warm the battery in advance for as much as 2 minutes and return to recharge in half an hour? In normal mode, this is no different from the average gasoline car, like Honda for example. I have a motorcycle for speed.

Lower maintenance costs, longer lifetimes of individual vehicles

I have 15 years old Honda Accord, and I payed nearly 16 000 $ on maintenance for all 15 years. Tesla model S cost me 85 000 $ for new car if I want by it and nearly 70% of that every 5 years because battery capacity will degrade and need replace. This not look like an lower maintenance cost.

plus idling is basically free so drive-thrus, listening to music while parked and stop go traffic wastes way less gas. Regenerative breaking not only provides some free charge to the motors but also spares your breaks so they last way longer.

The average mileage for me is 200 kilometers. In one day. And if I want to visit my parents, then 800 kilometers in one direction along the highways without recharge stations. ,Saving on idling, but the need to buy a generator for $ 1,500 just to visit your parents? I’d rather overpay for not to stand in the middle of nothing at -35 degrees for a few hours without working conditioner just to be able to drive on.

All change by regions. I can buy 95 gasoline per 0.6$ for liter. Electric cars will extreme hard try for enter to market.

UPD:

Not to mention how capturing pollutants at the plant is far more doable than capturing pollutants from every single car.

The irony is that transport throws out more factories, only if you count cars, ships and all other transport. If we count only private cars, then factories still emit more, even despite all the tricks of filtration. This, of course, does not mean that you should not try to reduce emissions. The main thing is that such dirty gasoline cars should not be replaced by a new conglomerate of factories.

Why you? I was talking about my geographical area. And we don’t build any wind turbines, we just use nuclear and hydroelectric power plants. although, of course, we mainly use thermal power plants.

Climate is a planetary-scale problem, so it is impossible to build environmentally friendly energy production on one side of the earth in the hope of overcoming warming. Maybe my English is not good enough. This is my third language, so I’m really sorry.

I really don’t understand the topic well, but I searched the Internet and indeed wind generation is possible. but there is still no solar generation due to too short daylight hours. as for hydroelectric power plants, they are already around. I did not think that they are considered green, given that they require flooding of huge territories.

UPD: also, for any large wind generation, forests will most likely have to be cut down.

Where should the energy for electric vehicles come from? of course, I understand that living somewhere in Europe, you can talk about wind turbines, solar panels and everything green. But if you live in a region where, if the heating is turned off, you can freeze to death in less than a day, you start looking at wind turbines and solar panels with irony.

And I don’t really understand, besides, how exactly replacing some energy emissions in random places with other emissions in random places will greatly help to cool the planet.

I recommend kyocera. maybe you’ll say, “man, you can buy 4 inkjet for the price of ecosys”, but on the other hand, you bought a ecosys and you can fill it with toner just from a balloon until the drum unit wears out.

nvidia-open-dkms usually doesn’t break when updating.

You have one GPU card? If yes you need some additional hooks (kill DE sessions, stop X, etc). Look here: https://github.com/joeknock90/Single-GPU-Passthrough .

UPD: Sorry. I read the reddit post. So you pass through single GPU. You load GPU bios when Windows load?

In general, such a configuration will be quite complicated, but if you want to try, show the VM configuration and the start hook. Without this not easy to say.

ubuntu mate is a good choice for a beginner, but if your computer is old enough, the system may slow down. This is due to the fact that snap images are slowly decompressed on older processors. You can try Linux Mint too.

About the software. The main thing is to accept the fact that not all Windows applications have analogues on Linux. some people actually make such a mistake. no need to try to install wine and migrate literally every exe file. Look at the software specifically for linux.

The default browser is firefox. But you can install chrome or chromium without any problems. There is OBS studio for linux for streaming. For games, you can put lutris. There is also an official steam client. if the game has an anti-cheat and this anti-cheat is not optimized for linux, you will not be able to play it.

As I wrote below, the problem is that this does not comply with the principle of K.I.S.S. One application should solve one task and can be replaced. Even now it is quite difficult to remove systemd-logind, for example. Because, although these are different services, they have long merged into a huge tangle.

I actually use systemd-boot because it’s very easy to install and configure and systemd-resolved, but for a lot of those I haven’t even heard about.

you can use EFISTUB If you don’t have dual boot. This literally load kernel from UEFI. I don’t know more simple way. https://wiki.archlinux.org/title/EFISTUB

As service manager systemd nice, but look all services:

systemd + systemd/journal + systemd/Timers
systemd-boot
systemd-creds
systemd-cryptenroll
systemd-firstboot
systemd-home
systemd-logind
systemd-networkd
systemd-nspawn
systemd-resolved
systemd-stub
systemd-sysusers
systemd-timesyncd

That’s look as overkill. I use only systemd, journald, systemd-boot, systemd-networkd, systemd-resolved and systemd-timesyncd, but that a lot systemd. Feel like system make monolith.

systemd-nspawn for example. Systems manager for containers. Seriously. Why than exists? I don’t understand. Really, someone use that daemon?