A standard called SystemReady exists. For the systems that actually follow its standards, you can have a single ARM OS installation image that you copy to a USB drive and can then boot through UEFI and run with no problems on an Ampere server, an NXP device, an Nvidia Jetson system, and more.

Unfortunately it’s a pretty new standard, only since 2020, and Qualcomm in particular is a major holdout who hasn’t been using it.

Just like x86, you still need the OS to have drivers for the particular device you’re installing on, but this standard at least lets you have a unified image, and many ARM vendors have been getting better about upstreaming open-source drivers in the Linux kernel.

To the contrary, I would expect the sample to skew more towards people who have a heavily customized X session and strong opinions about window managers while drastically underrepresenting average GNOME users who stick with the default Wayland session. Someone who likes their custom setup can still be waiting for a Wayland equivalent while casual Ubuntu users have been defaulted to Wayland on new non-nvidia installs since early 2021.

I tried to do this a while ago with a GNOME system, setting GDM to automatically log me in, but I ended up always getting prompted for my password from gnome-keyring shortly after logging in which seemed to defeat the point. If you use GNOME, you might want to look at ArchWiki’s gnome-keyring page which describes a couple solutions to this problem (under the PAM section) which should be applicable on any systemd distro.

A ground-up overhaul of the copyright system would make things so much worse, not better, considering the current climate of power. In the US for example, MPA, RIAA, Entertainment Software Association, Association of American Publishers, and others wouldn’t want public libraries or the used market to exist at all; they would push for making every single transfer of “ownership” on any media involve a payment to the rights holder. Lawmakers are far more likely to accommodate those groups’ desires than the public good.

The worst parts of the current copyright system are the most recent. Both the DMCA and the extension of US copyright term to 95 years took effect in 1998, and the early 2000s saw many other countries passing laws to make their copyright system closer to US’s in various ways such as the WIPO Copyright Treaty which took effect in 2002 and EU’s 2006 Copyright Directive. Just about the only positive news we’ve seen in US copyright law since then is in temporary exemptions to DMCA’s anti-circumvention rules (Section 1201) which change every year. Copyright law was far less hostile to consumers and the public before the 90s than it is now, and up until 1976 it used to be expected that most media someone consumes would enter public domain within their lifetime.

The digital era makes market relevance far more ephemeral than ever and yet the laws written for the digital era moved copyright in the opposite direction. Movie studios simultaneously judge whether a film succeeded almost exclusively based on its first week of ticket sales and also claim that depriving public domain for 95 years is necessary. Nothing should be able to justify more than 20 years of copyright. Media formats don’t even last as long as copyright; CDs and DVDs rot, game cartridges die, servers shut down, and even books printed on today’s low-quality paper will fall apart.

Some of it is absurd to me, like the way something can be online but geographically restricted.

This is a consequence of contract terms moreso than copyright. One issue in copyright law that this does connect to, though, is the fact that the question of whether the rightsholder keeps a work reasonably available on the market does not impact whether the work retains copyright protections. If copyright law did hypothetically include that limitation, providers would become far more likely to make sure that all content is available in all countries, but even then things could still vary in terms of which content is on which platform.

There’s only one case I’ve found where Wi-Fi use seems acceptable in IoT: ESPHome. It’s open-source firmware for microcontrollers that makes DIY IoT sensors and controls accessible over LAN without phoning home to whatever remote server, without trying to make anything accessible over the Internet, and without breaking in any way if the device has no route to the Internet.

I still wouldn’t call Wi-Fi use ideal even there; mesh can help in larger homes and Z-Wave/Zigbee radios tend to be more power efficient, though ESP32 isn’t exactly suited for a battery-powered device that’s expected to run 24/7 regardless.

That’s strange. As far as I can tell from any web searches, every version Windows still defaults to storing local time to the hardware clock and there are no reports of that changing with an update, nor is there any exposed setting control to configure this behavior outside of regedit. If you’re curious enough, you can check the current setting in the registry at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation. Windows maintains the current time as UTC if and only if the RealTimeIsUniversal key is present and nonzero.

I expect it’s more likely some other issue would make the BIOS display an hour that’s inconsistent with your local timezone. For example, maybe a bug in the BIOS, maybe a timezone offset setting within the BIOS, or maybe a dead clock battery.

Unix time is far less universal in computing than you might hope. A few exceptions I’m aware of:

• Most real-time clock hardware stores datetime as separate binary-coded decimal fields representing months, days, hours, minutes, and seconds as one byte each, and often the year too (resulting in a year 2100 limit).
• Python’s datetime, WIN32’s SYSTEMTIME, Java’s LocalDateTime, and MySQL’s DATETIME similarly have separate attributes for year, month, day, etc.
• NTFS stores a 64-bit number representing time elapsed since the year 1601 in 100-nanosecond resolution for things like file creation time.
• NTP uses an epoch of midnight 1900-01-01 with unsigned seconds elapsed and an unusual base-2 fractional part
• GPS uses an epoch of midnight 1980-01-06 with a week number and time within the week as separate values.

Converting between time formats is a common source of bugs and each one will overflow in different ways. A time value might overflow in the year 2036, 2038, 2070, 2100, 2156, or 9999.

Also, Unix time is often managed with a separate nanoseconds component for increased resolution. Like in C struct timespec, modern *nix filesystems like ext4/xfs/btrfs/zfs, etc.

as soon as the BIOS loaded and showed the time, it was “wrong” because it was in UTC

Because you don’t use Windows. Windows by default stores local time, not UTC, to the RTC. This behavior can be overriden with a registry tweak. Some Linux distro installer disks (at least Ubuntu and Fedora, maybe others) will try to detect if your system has an existing Windows install and mimicks this behavior if one exists (equivalent to timedatectl set-local-rtc 1) and otherwise defaults to storing UTC, which is the more sane choice.

Storing localtime on a computer that has more than one bootable OS becomes a particularly noticable problem in regions that observe DST, because each OS will try to change the RTC by one hour on its first boot after the time change.

if the featureset is not clear enough at first glance

My experience as someone who has barely dabbled in Matrix, tried comparing clients, and knows a lot of people who stick to Discord: a lot of Discord users heavily use custom emotes, voice chat, and screen sharing. It’s not even easy to figure out which Matrix clients support each of those features without installing everything and trying it out. There’s a clients comparison on matrix.org that mentions Voip but not stickers or video.

For stickers alone:

• Element is widely considered the go-to Matrix client but uses a strange integration system for predefined sticker packs instead of the MSC2545 stickers that more closely resemble what users coming from Discord would want.
• Cinny seems to have the best support for stickers/emotes but its site doesn’t mention them at all. It supports uploading and managing sticker packs at either a channel or user level, provides a nice picker UI to send any picture from those packs as either a large “sticker” or a small inline “emoji”, and allows using them for reactions.
• FluffyChat mentions stickers on its site and has the second best sticker support, with all of those except reactions and a graphical sticker picker for inline emoji (need to type them as shortcode).
• SchildiChat, Nheko, and NeoChat have some sort of limited support for custom stickers/emoji. NeoChat is the only one of those that advertises stickers on its main site. Nheko mentions them in a GitHub readme.

Being able to freely use custom emotes without paying for a Discord Nitro subscription nor server boosts would be a great selling point but it’s not something most users would be able to figure out before signing up. The limited client support isn’t great; e.g. Fluffy is the only Android client that supports sending custom stickers but some people may dislike the chat bubbles style UI.

I have configured custom Android kernel builds to enable more USB drivers, enable module support, and tweak various other things. For one tangible example of the result: I could plug in a USB Wi-Fi adapter and use it to simultaneously connect to another Wi-Fi network with the internal NIC while also sharing my own AP over USB. On an Android device of all things. I have also adjusted kernel builds for SBCs (like Pi clones) to get things working at all.

I have never seen any reason to configure a custom kernel for my own desktop/laptop systems. Default builds for the distros I’ve used have been fine for me; if I’m ever dissatisfied with anything it’s the version number rather than the defconfig. The RHEL/Rocky kernel omits a few features I want (like btrfs) but I’d rather stick to other distros on personal systems than tweak a distro that isn’t even meant for tweaking.

Not every work environment is the same.

When I first started with my current employer I was given a system with RHEL preinstalled and I replaced it with Fedora on my first day. I was told to use LUKS and given a normal OpenVPN profile but otherwise they don’t control or monitor anything about my workstation. No matter how many years or decades I stay at this company, it’s extremely unlikely I’ll ever touch an OS that isn’t Linux-based during work time.

Every previous job I’ve been at also had me use Linux for my primary workstation, because my field of work more or less requires it, but some have needed me to access a separate Windows system/server/VM on rare occasions.

I recommend giving dnf the -C flag to most operations, particularly those that don’t involve downloading packages. The default behavior is often similar to pacman’s -y flag and so the metadata sync ends up slowing everything down by orders of magnitude.

I’ve long known about it. I don’t seriously use it, but I would if only my Wi-Fi router was fully supported. It’s an Asus one (that I got for free from T-Mobile a decade ago) so I installed Asuswrt-Merlin on it instead.

Following the recommendation of homelab communities, I got into OpnSense (a BSD-based firewall system for x86 hardware only) last year, still keeping my Wi-Fi router as a dedicated AP. In hindsight I somewhat regret that choice and probably would’ve been better off buying a new OpenWRT-compatible router and using it to handle firewall/routing/AP all in one device instead of wasting the power draw of another separate N100 system. I like having wireguard and vnstat in my router now, which Merlin didn’t offer, but I know OpenWRT has those too and I don’t have any other needs that warrant a higher-power router.

I’ve been using it since it felt usable enough in GNOME to me. Around 2015-ish, give or take a year. GNOME leading on Wayland support is a big part of why I switched to it from Xfce back then. Nowadays KDE and others have plenty good Wayland support too (better in some ways like allowing server-side decorations and global shortcuts) but I just haven’t felt like trying to properly experiment to see what I like.

I’ve always avoided Nvidia on my desktops. Stuck with either radeon or intel and never had any exceptionally big issues with them on Wayland. Though other things like hardware accelerated video decoding have had a history of being spotty on some drivers/GPUs.

The readme file, gitmodules file, and other links within that repo all still reference the now-dead gitlab links. The builds don’t seem to be present at all.

That will all probably be fixed soon enough but right now that mirror which seems to have just been pushed as-is isn’t entirely usable.

If you’re assuming “as long as the hardware will function” in the first place: even digital copies, DLC, and updates installed on the system before the servers shutdown will continue working even without hacks. There’s no check-in requirement except for the subscription-locked things like SNES games.

However, the result of a nonrepairable hardware failure when you have no hacks nor official servers is rather bad no matter how your games are obtained: OFW does not allow you to transfer save data from one system to another without going through Nintendo servers and a vast majority of cartridge games are incomplete without updates or DLC.

I never liked to play DS games on 3DS because of the blurry screen: DS games run at a 256x192 resolution while the 3DS screens stretch that out to 320x240. Non integer factor scaling at such low resolutions is incredibly noticeable.

DSi (and XL) similarly can be softmodded with nothing but an SD card, though using a DS Lite instead with a flashcart can enable GBA-Slot features in certain DS games including Pokemon.